The system is owned by Phlippo Productions, an L-Acoustics partner for the past four years, who also supplied eight technicians for the build. Design for the audio systems was by Noizboyz, a group of freelance audio technicians who specialise in live sound for electronic dance music (EDM). They have specified L-Acoustics systems for Tomorrowland since they first became involved with the festival in 2011.
"Back then we started with a V-DOSC / SB218 rig. With the arrival of K1 we changed it to K1 / SB28 and this year we upgraded the main systems to KS28 subs and all LA12X amps," the Noizboyz technical team explains.
"The main reasons we use L-Acoustics at Tomorrowland are the tonality of the systems, which match EDM really well, and the throw of the K1. The maximum distance we need to project the sound is 160m and K1 is capable of delivering very good sound even at that distance. Another reason is the amount of energy in the low end we get from the K1 - we have to create sound 180° vertically and K1 really helps with extending the low end reach."
At this year's event, L-Acoustics systems featured on the Main Stage, Wind Stage, Garden of Madness, The Opera, The Gathering and Comfort areas. Supplied by Antwerp-based Phlippo Productions, the total L-Acoustics inventory on the main and VIP systems featured 116 K1, 86 KS28, 76 SB28, 60 K2, 20 SB18, 17 X15HiQ, 16 K1-SB and 14 ARCS Wide, with 134 Kara, 16 12XT, 12 Kudo, eight Kiva, eight X12 and four 115XT HiQ as fills and delays.
Power was provided by 66 LA12X amplifiers for the Main and Opera Stages, with 116 LA8 and seven LA4X taking care of the other stages and delays. L-Acoustics was also very much in evidence for monitoring, including 32 Kara, 12 SB18 and 10 115XT HiQ, powered by a total of 17 LA8 amplifiers.
"The biggest challenge for us is providing systems with a long enough throw and power to deliver the amount of energy for the high quality sound that Tomorrowland demands," say Noizboyz. "Another challenge is that the stages are highly decorated and it is not easy to rig a PA between it all. The footprint we need to fly the K1 is really small - it's that which makes it possible to fly the PAs."
The Noizboyz team used L-Acoustics Soundvision to predict the coverage of each system, with LA Network Manager software to pre-program the system control, which saved a lot of time on site.
(Jim Evans)
